Skip to content
Your Safety, Our Assessment - Absolutely Free! Sign-up for a FREE site assessment.
Your Safety, Our Assessment - Absolutely Free! Sign-up for a FREE site assessment.
UltraTech IBC Spill Pallet Plus, part 1158, polyethylene secondary containment for one IBC tote

IBC Spill Pallet Chemical Compatibility: Poly vs Steel for Your Tote

Quick Answer

Most IBC totes can sit on a polyethylene spill pallet, but don't assume it. Look up the exact chemical, and its concentration, on UltraTech's molded polyethylene compatibility guide before you buy. An A rating means it's suitable for long term storage at 100°F or less, B means short term storage under a year, and C means UltraTech says don't store it in their containment. If the poly rating comes back weak, check the galvanized steel guide, which grades corrosion instead. Steel is also the call for flammable liquids or areas with high heat, because UltraTech says steel won't melt or deform in a fire. When the chart and your SDS don't give you a clear answer, send us the chemical and we'll get it checked before you order.

UltraTech IBC Spill Pallet Plus, part 1158, polyethylene secondary containment for one IBC tote
IBC Spill Pallet Plus, Part #1158. All polyethylene (LLDPE) construction.

Why compatibility matters for tote containment

A spill pallet only works if the sump survives the spill. UltraTech's polyethylene guide says some chemicals attack poly through stress cracking, swelling, oxidation or permeation. Their galvanized steel guide says some chemicals corrode galvanized steel.

For hazardous waste container storage, EPA's rule at 40 CFR 264.175(b)(1) says the base under the containers has to be free of cracks or gaps and sufficiently impervious to contain leaks, spills and accumulated precipitation until the collected material is detected and removed.

If you need help with sizing (how many gallons, 275 vs 330 gallon totes, indoor vs outdoor), our IBC spill containment guide covers that. This post is only about material.

General information, not legal advice. Your permit, SPCC plan, state rules and local fire code set the actual requirements.

Your material options for IBC totes

Polyethylene Galvanized steel Fluorinated polyethylene
IBC models IBC Spill Pallet Plus 1157/1158; IBC Hard Top 1161/1162 Steel IBC Spill Pallet 1184; Steel Twin IBC Spill Pallet 1183; Steel IBC Hard Top 1185 (painted steel sump, galvanized top) Drum pallets and spill decks only, such as P4 1232 and P2 1212
UltraTech guide Molded polyethylene guide, 311 chemicals Galvanized steel guide, 201 chemicals Fluorinated pallets and decks guide, 38 chemicals
How it's graded A long term at 100°F or less; B short term under a year; C do not store A to C by corrosion depth per year; NR not recommended A resistant; B variable resistance; C not recommended; rated at 70°F and 130°F
Heat and fire UltraTech says plastic pallets are susceptible to fire and intense heat Won't melt or deform from extreme heat or fire, per UltraTech Same base material as poly
Lead time Pallet Plus ships in 3 to 4 weeks; hard tops ship in 8 to 10 weeks Confirmed at quote; hard tops ship in 8 to 10 weeks Confirmed at quote

Polyethylene IBC spill pallets

The IBC Spill Pallet Plus, Part #1157 (no drain) and Part #1158 (with drain) are all polyethylene (LLDPE). UltraTech says the all poly build offers excellent chemical resistance and won't rust or corrode. Right now they ship in 3 to 4 weeks.

"Excellent chemical resistance" doesn't mean "good with everything." UltraTech links its molded polyethylene chemical compatibility guide right on the product page. It lists 311 chemicals, many by concentration, so a chemical can rate one way at one strength and another way at a different strength. Match the concentration on your SDS, not just the name.

The ratings come from published data from the makers of the plastic, not from UltraTech's own testing. UltraTech explains the reference test soaks a sample in the chemical for a full year, which they call overkill for secondary containment. Their guide notes most containment only holds a leak for hours, a day or a week at most before cleanup, and that user testing may show some C rated chemicals work for exposure of one week or less. That's not a green light. Treat a C as a C until it's been checked.

Totes stored outside

UltraTech says the Pallet Plus has UV inhibitors so it will last for years in sunlight without degrading. The same goes for the IBC Hard Top, Part #1162 (no drain) and Part #1161 (with drain), which are 100% polyethylene with UV inhibitors and a rigid poly cover. Hard tops are built to order and ship in 8 to 10 weeks. The compatibility guide's A rating is for storage at 100°F or less, so if your tote sits somewhere that runs hotter, call us before you count on that A.

UltraTech polyethylene IBC Hard Top with the cover closed, part 1162, for outdoor IBC tote storage
IBC Hard Top, Part #1162. Polyethylene with UV inhibitors and a built in cover.

Steel IBC containment

The steel IBC Spill Pallet, Part #1184 is 14 gauge galvanized steel. UltraTech lists it for chemicals, hazardous materials and flammable liquids, and says it won't melt or deform from extreme heat or fire. There's also a twin model, Part #1183 for two totes side by side.

For totes that live outside, the IBC Hard Top, Steel Model, Part #1185 has a 14 gauge painted steel sump and a 16 gauge galvanized top. UltraTech says it can take extreme temperatures and fire if that's a concern where you'll use it. A twin steel hard top, Part #1186 handles two totes. Both ship in 8 to 10 weeks.

Steel has its own chart. UltraTech's galvanized steel chemical compatibility guide covers 201 chemicals and grades them by how fast they corrode the steel. A means 0.002 inches per year or less, B means 0.020 or less, C means 0.050 or less, and NR means not recommended. Many entries list a test temperature, so match that to your conditions too. Note the guide is for galvanized steel. The 1185 sump is painted steel, so if your chemical is borderline, ask us to confirm with UltraTech.

UltraTech galvanized steel IBC spill pallet, part 1184
Steel IBC Spill Pallet, Part #1184. 14 gauge galvanized steel.

What about fluorinated poly?

UltraTech makes fluorinated versions of some spill pallets. The pallets are standard molded polyethylene that goes through a fluorination process, which UltraTech says makes them more compatible with aggressive chemicals. Their rule of thumb is that fluorination improves the rating on the compatibility guide by about one letter, and they say their engineering team should confirm any specific rating. Fluorinated models have their own fluorinated compatibility guide.

Here's the catch for tote owners. UltraTech's fluorinated line is drum pallets and spill decks, like the light blue Spill Pallet P4 Fluorinated, Part #1232 and P2 Fluorinated, Part #1212. UltraTech's IBC spill pallet lineup doesn't list a fluorinated model. If your tote chemical rates poorly on both the poly and steel guides, call us and we'll ask UltraTech what they can do for that chemical.

UltraTech light blue fluorinated polyethylene drum spill pallets, part 1232
Fluorinated spill pallets come in light blue. UltraTech offers them for drums, not totes.

Don't mix incompatible chemicals in one sump

Two totes on one sump means two spills can land in the same pool. If they react, the containment becomes the problem.

  • Hazardous waste rule: under 40 CFR 264.177(c), a container holding a hazardous waste that's incompatible with materials stored nearby must be separated from them or protected by a dike, berm, wall or other device.
  • Same container: 264.177(a) says incompatible wastes must not go in the same container unless the precautions in 264.17(b) are met.
  • Your SDS: OSHA requires Section 7 of every safety data sheet to cover safe storage, including any incompatibilities, and Section 10 to list incompatible materials. Read both for every tote that will share a sump.

How to check your chemical in 5 steps

  1. Pull the SDS for what's in the tote. Note the chemical name, the concentration, and Sections 7 and 10.
  2. Look it up on the poly guide. Find the matching chemical and concentration and note the letter.
  3. If it's B or C, or it's flammable, look it up on the galvanized steel guide too.
  4. Check your conditions. Poly A ratings are for 100°F or less. Steel ratings list their own test temperatures.
  5. Still not sure? Send us the SDS. We'll ask UltraTech to check it before you buy.

When to call us for a compatibility check

  • Your chemical isn't on the chart, or only at a different concentration.
  • It rates B or C on poly and you need long term storage.
  • It's a blend or trade name product.
  • The tote sits hotter than the chart's test temperature.
  • Two different chemicals will share one sump.

On a C rating, UltraTech says you can ask about past testing with that chemical or request a material sample to test yourself.

Get an IBC containment quote

Send us the SDS for each tote, how many totes you have, whether they sit indoors or out, and your delivery address. We'll check compatibility against UltraTech's guides, match the right material and model, and quote freight to your site. Email orders@industrialandsafetysupply.com or use the button below. Browse all IBC containment.

Request an IBC Containment Quote

Frequently Asked Questions

Is a poly IBC spill pallet compatible with my chemical?

Check UltraTech's molded polyethylene compatibility guide for your exact chemical and concentration. A means suitable for long term storage at 100°F or less, B means short term storage under a year, and C means don't store it in UltraTech containment.

When do I need a steel IBC spill pallet instead of poly?

When your chemical rates poorly on the poly guide but well on the galvanized steel guide, or when you store flammable liquids or the area sees high heat. UltraTech says its steel IBC containment won't melt or deform from extreme heat or fire.

Is there a fluorinated IBC spill pallet?

UltraTech's fluorinated models are drum spill pallets and spill decks, such as the P4 Fluorinated Part #1232. Its IBC spill pallet lineup doesn't list a fluorinated version. Call us if your tote chemical needs one.

Can I store two different chemicals on one IBC sump?

Only if they're compatible with each other. Check Sections 7 and 10 of each SDS. For hazardous waste, 40 CFR 264.177 requires incompatible materials to be separated or protected by a dike, berm, wall or other device.

What if my chemical rates C or isn't on the chart?

Treat it as not compatible until it's checked. Send us the SDS and we'll ask UltraTech. UltraTech can share past testing or send a material sample for you to test.

How long do IBC spill pallets take to ship?

IBC Spill Pallet Plus models 1157 and 1158 ship in 3 to 4 weeks. Hard tops, poly or steel, are built to order and ship in 8 to 10 weeks.

Related guides

Next article Dewatering Bag Sizing Guide: How to Pick a Bag for Your Pump