Bulkhead Fitting for Flexible Spill Decks Part #1357
Frequently Asked Questions
If storage or shipping space is a concern, the flexible model will take up considerably less space than the other models.
The flexible models have a smaller containment capacity. For example, the 4-drum flexible model can contain up to 11 gallons compared to 44 gallons for the standard spill deck. So depending on the application, you could end up needing to connect several more of the flexible model spill decks in order to be in compliance.
The outer yellow sump is 18 oz. PVC and the grating is polyethylene.
Yes. The flexible model spill decks are connected in the same way as the standard spill decks. Using the same bulkhead fittings (Part# 1073) two or more spill decks can be connected in order to share containment capacity and meet spill containment regulations.
If a customer knows ahead of time the layout of their flexible spill deck system, we can pre-cut the holes for them so all they have to do when the units arrive is assemble them. However, it is possible to install a bulkhead fitting in the field (including cutting your own holes). Please contact us for more information and instructions.
The bladder(s) should be replaced for any of the following reasons: (1) It captures a spill (regardless of the size of the spill), (2) It deploys, rolls, or falls out of the bladder attachment housing. (3) It has sat unused for more than five years.
More Info / Downloads
Helps Comply with These Rules & Regulations
- EPA Container Storage Regulation 40 CFR 264.175
- Spill Prevention, Control and Countermeasure Act (SPCC) 40 CFR 112
Additional Product Information
Uniform Product Codes (UPCs)
- UPC 808416013528 Ultra-Spill Deck P4 Flexible Model (Part #1352)