Skip to content
Your Safety, Our Assessment - Absolutely Free! Sign-up for a FREE site assessment.
Your Safety, Our Assessment - Absolutely Free! Sign-up for a FREE site assessment.

Spill Berm, Table Top, 4 Foot Length, 3/4” H Part #2051

Original price $72.00 - Original price $72.00
Original price
$72.00 - $72.00
Current price $72.00

Frequently Asked Questions

The Ultra-Spill Berm Plus can be cut to size with a utility knife or other sharp blade. However, keep in mind that if you cut it, you will lose the ability to connect it on one side since the connectors for this spill berm are built-in. As always, be sure to wear the appropriate PPE and use caution when cutting.

Yes, by using the built-in connectors multiple spill berms can be joined together to form larger/wider containment areas.

Yes, the standard Ultra-Spill Berm is 10 feet long. Keep in mind that product is 2 1/4″ high (The Ultra-Spill Berm Plus is 4 1/2″ high). If the 4 1/2″ height is desired, you would need to connect two units together.

‘NR’ stands for ‘Not Recommended’. HOWEVER, it is worth noting that most chemical compatibility guides (ours included) are based on a one-year immersion test. In other words, the material being tested is completely immersed in the chemical in question. After one year, the material is removed and checked for any degradation. Needless to say, a spill response product is not going to be exposed to a chemical for a year. So it’s possible that the Ultra-Spill Berm will be effective against a spill of a chemical that is listed as ‘NR’. The best way to know for sure is to test for yourself. Please contact our customer service team and they will be able to send you a no-charge sample.

Yes, cyanoacrylates can be used to bond the Ultra-Spill Berm to a surface. Cyanoacrylates are a family of strong fast-acting adhesives commonly sold under names such as “Super Glue” and “Krazy Glue”.

The Ultra-Spill Berm Plus is made with urethane and will degrade/break down in extended UV exposure. It is recommended that spill berms only be exposed for as long as required to contain and clean-up a spill. Long-term outdoor use is not recommended.

Typically, a standard soap and water mixture is all that is needed to clean a Spill Berm. Once the Ultra-Spill Berm Plus has been cleaned it should be allowed to air dry and then returned to its original packaging.

Yes, the Ultra-Spill Berm Plus is reusable provided that it has not been exposed to a chemical that has caused any degradation.

The Ultra-Spill Berm Plus should be stored in a cool, dry area in the carrying case that it is shipped in. It is important that the Ultra-Spill Berm Plus does not touch itself because, over time, the touching areas will fuse together. This can be prevented by wrapping the entire spill berm with plastic sheeting.

It is not recommended that the Ultra-Spill Berm be driven over. The softer nature of the material can be damaged under vehicle tires and other equipment.

More Info / Downloads

This product may not address any specific regulations but if you have any questions, we’re here to help.

Additional Product Information

Uniform Product Codes (UPCs)