Ultra-Containment Wall Systems - Part #8790
Frequently Asked Questions
1-ft high – approximately 10’
2-ft high – approximately 8’
3-ft high – approximately 6’
The 30 MIL polyethylene textured liner is held on the walls with 8-foot long clips. These clips snap over the liner and the straight section walls (see image in gallery).
1-ft wall – we recommend 5 feet extra on each side
2-ft wall – we recommend 10 feet extra on each side
3-ft wall – we recommend 15 feet extra on each side
Please note that our liners are made from rolls of material that are 12 feet wide. So the liner that comes with your Ultra-Containment Wall system may be considerably larger than the overall footprint of the system. Any excess material can easily be trimmed with a utility knife.
The components overlap when connected to provide additional support/security. Because of this overlap, the overall dimension of a system is shorter.
Yes. Please contact us for more information and minimum purchase quantities.
At this time, the 1, 2 and 3-foot heights are the only ones that are available.
Yes, the walls stack for easier storage and shipping.
Because of the design of the system, a drain cannot be installed.
More Info / Downloads
Helps Comply with These Rules & Regulations
- EPA Container Storage Regulation 40 CFR 264.175
- ADA Accessibility Guidelines for Buildings and Facilities (ADAAG)