Ultra-Hydrokleen Activated Carbon Media Filter Bag - Part #9463
Frequently Asked Questions
The Ultra-HydroKleen is designed to fit up to three filters.
The order will depend on the concentration of the pollutants in the water and may require some experimentation to get the best results. Typically, if an activated carbon filter is used, it will be the last filter media before the water exits the Ultra-HydroKleen as it is a “polishing” media.
Yes, a sampling option is available that will allow “post-treatment” samples to be taken. The sampling option is part number 9876 and MUST be ordered with the Ultra-HydroKleen (it cannot be installed as a retrofit).
The body of the Ultra-HydroKleen is 15″ x 19″ and 19″ deep.
Yes, but the diameter of the drain opening within the ledge that the grate sits (X2) will need to be at least 26”. This is because the rectangular bottom portion of the Hydrokleen is 15”x19” and the widest part of the shell would be approximately 24.2” wide. A 26” diameter would allow the unit to fit comfortably within the catch basin.
This will depend on the location of the unit and will vary for each Ultra-HydroKleen. We recommend an inspection after the first rainfall to get an idea of what the pollutant load is for that particular drain. Periodic inspections and water testing will help determine the efficiency of each filter and when replacements are necessary.
Sediment, silt, sand, and dirt can be scooped out of the HydroKleen’s chamber or, for complete removal, the entire Ultra-HydroKleen can be removed from the catch basin and hosed out.
Initially, the process is just like any other product, it is ordered through one of our distributors. But once we receive that order we will coordinate with your distributor to get more information on the catch basin that the Ultra-HydroKleen will be installed in. We will need to get the measurement instructions and filter media selection forms completed and returned to us. Because of the customization of this product, there is a lead time involved. Once all the information is provided we will be able to provide you with an estimated lead time.
More Info / Downloads
Helps Comply with These Rules & Regulations
- EPA Container Storage Regulation 40 CFR 264.175
- Stormwater Management Regulation 40 CFR 122.26
- International Fire Code (IF) 5004.2.3
Additional Product Information
Uniform Product Codes (UPCs)
- UPC 808416098761 Ultra-Hydrokleen Sampling Option (Part #9876)
- UPC 808416094633 Ultra-Hydrokleen Activated Carbon Media Filter Bag (Part #9463)
- UPC 808416094626 Ultra-Hydrokleen Sorb 44 Media Filter Bag (Part #9462)
- UPC 808416094619 Ultra-Hydrokleen PhosFilter Media Filter Bag (Part #9461)
- UPC 808416094602 Ultra-Hydrokleen Heavy Metal Media Filter Bag (Part #9460)